Chezy Socket Fusion
Stop Valve

The socket fusion technique is a method for assembling HDPE plastic piping systems. The general operating principles consist of a heating phase and a cooling/welding phase.

Socket Fusion Welding Parameters

Table structure follows the latest approved website specification-table style.

Table 1

DN	Heating Time (sec)	Fusion Time (sec)	Cooling Time (min)	Pipe size (mm)
15	7	5	2	2
20	10	5	2	2
25	12	5	4	4

Pipe insert must be used for HDPE pipes during socket fusion.

Socket Fusion Stop Valve Installation Method

Four installation steps from the supplied catalogue.

Step 1

Mark the insertion depth and place the pipe insert into the pipe.

Step 2

Using the right size bush, set up the welding machine and wait until the required temperature is reached (230°C–260°C).

Step 3

Push the valve and pipe into the respective bushes and heat them until the required heat time is reached. Refer to Table 1.

Step 4

Pull out the valve and pipe, push the pipe into the fitting and hold them in place as stated in Table 1. Leave the joint to cool for 2 minutes.

Socket Fusion Stop Valve Configurations

All product specification tables use the same modern HTML table structure as the latest approved Elementor JSON design.

Plastic Sleeve Configurations

Plastic Black Sleeve (X-Handle / T-Handle)

Model	Pipe Size (mm)	Dimension A	Dimension B	Dimension C	Dimension D	Dimension E
DN15	1/2"/15mm	30	24	41	28	55
DN20	3/4"/20mm	37	20	41	28	55
DN25	1"/25mm	45	20	41	28	55

Plastic Black Sleeve Long (X-Handle / T-Handle)

Model	Pipe Size (mm)	Dimension A	Dimension B	Dimension C	Dimension D	Dimension E
DN15	1/2"/15mm	30	24	76	28	55
DN20	3/4"/20mm	37	20	76	28	55
DN25	1"/25mm	45	20	76	28	55

Plastic Chrome Sleeve (X-Handle / T-Handle)

Model	Pipe Size (mm)	Dimension A	Dimension B	Dimension C	Dimension D	Dimension E
DN15	1/2"/15mm	30	24	41	28	55
DN20	3/4"/20mm	37	20	41	28	55
DN25	1"/25mm	45	20	41	28	55

Plastic Chrome Sleeve Long (X-Handle / T-Handle)

Model	Pipe Size (mm)	Dimension A	Dimension B	Dimension C	Dimension D	Dimension E
DN15	1/2"/15mm	30	24	76	28	55
DN20	3/4"/20mm	37	20	76	28	55
DN25	1"/25mm	45	20	76	28	55

Metal Sleeve Configurations

Metal Sleeve (X-Handle / T-Handle)

Model	Pipe Size (mm)	Dimension A	Dimension B	Dimension C	Dimension D	Dimension E
DN15	1/2"/15mm	30	24	51	28	60
DN20	3/4"/20mm	37	20	51	28	60
DN25	1"/25mm	45	20	51	28	60

Metal Sleeve Long (X-Handle / T-Handle)

Model	Pipe Size (mm)	Dimension A	Dimension B	Dimension C	Dimension D	Dimension E
DN15	1/2"/15mm	30	24	76	28	60
DN20	3/4"/20mm	37	20	76	28	60
DN25	1"/25mm	45	20	76	28	60

Alternative Handle Designs

Classic Handle

Model	Pipe Size (mm)	Dimension A	Dimension B	Dimension C
Female Thread	1/2"/15mm	30	24	51
	3/4"/20mm	37	20	51
	1"/25mm	45	20	51

Square Knob Handle

Model	Pipe Size (mm)	Dimension A	Dimension B	Dimension C
Female Thread	1/2"/15mm	30	24	76
	3/4"/20mm	37	20	76
	1"/25mm	45	20	76